SS-080-050-10,000PUB-S1 | U-Shaped Semiconductor Gage | Backed | Single Gage

SS-080-050-10,000PUB-S1  Semiconductor Strain Gage
Price: $24.12
This product qualifies for quantity discount pricing.(what's this?)

Micron's Backed SS-080-050-10,000PUB-S1 is a Semiconductor Strain Gage with a Total Length of 080 and an Active Length of 050 with a Nominal Resistance of 10,000 at 78 degrees F.
Further defined as Dopant P and Configured as a U-Shaped Gage.
S1 specifies Single Gage with Data on a Single Backing

Backed Semiconductor Strain Gages are mounted on a flexible insulated circuit with versatile solder pads makes them easy to install. They can be bent without hurting the gage and will perform like a foil gage except that the sensitivity change is 50 to 75 times greater.

Micron Instruments Backed Semiconductor Strain GagesBacked Semiconductor Strain Gages are mounted on a flexible insulated circuit with versatile solder pads makes them easy to install. They can be bent without hurting the gage and will perform like a foil gage except that the sensitivity change is 50 to 75 times greater.

The gage and gold wires are over-coated to seal out moisture and to provide additional protection of the gage during the application process.

On load cells and foil bridges these gages can be used as a linearity corrector. A non-linearity of 0.125 % FS can be corrected to less than .05 % of full scale. Long-term stability is not compromised.

Backed gages are suggested for use in prototyping for proof of concept and for transient or high frequency measurements.

Backed gages are available in two styles: Backed "Bar", and Backed "U"

Micron Instruments Backed Semiconductor Strain Gages

Gage Specifications

Material Czochralski pulled boron doped silicon.
Leads .002 dia. gold x 0.5 inch long. Some gages have .0015 dia. leads.
Contact Pad Gold nickel fused, aluminum, or Hi-Temp.
Lead Attachment Parallel gap welded with epoxy reinforcement or ball bonded.
Operating Strain ±2000 μ inch/inch ( 3000 μ inch/inch max.)
Linearity Better than ±0.25% to 600 μ inch/inch
Better than ±1.5% to 1500 μ inch/inch
Max. Oper. Temperature +278°F Bonded.

PART NUMBER

Width

Lead
Type

Thickness

Resistance Ohms
@78° F

Gage Factor

TCGF*

TCR*

SS-150-124-15PB

.009

WL

.0010

15 ±2

100 ±10

-10%

6%

SS-150-124-25PB

.008

WL

.0008

25 ±3

100 ±10

-10%

6%

SS-080-050-120PB

.008

WL

.0004

120 ±20

120 ±10

-9%

5%

SS-080-050-345PB

.008

WL

.0004

345 ±40

140 ±10

-13%

16%

SS-060-033-500 PB

.008

WL

.0004

540 ±50

140 ±10

-13%

15%

SS-060-033-1000PB

.008

WL

.0004

1050 ±75

155 ±10

-18%

24%

SS-060-033-5000PB

.008

WL

.0004

5000 ±500

175 ± 10

-23%

47%

SS-080-050-10,000PUB "U"

.008

WL

.0004

10000 ±1000

175 ±10

-23%

42%

SS-060-033-2000PUB "U"

.016

WL

.0004

2000 ±100

155 ±100

-18%

25%

Note: Many of our Standard "BAR", "U" or "M" gages can be Backed. Contact Us for pricing and availability.

Standard Bridge Matching
Temperature °F
78°
278°
Standard Matching

±0.6%

±0.4%
±0.4%
Percent of Base Resistance

Semiconductor Strain Gage FAQ's and Technical Notes

  1. Semiconductor Gage Terms & Definitions
    1. What is Gage Factor
    2. What is Thermal Coefficient of Gage Factor (TCGF)
    3. What is Thermal Coefficient of Gage Resistance (TCR)
  2. Determining Excitation Voltage for Micron Instruments Semiconductor Strain Gages
  3. Thermal Matching Information-Gage Sets
  4.  Which Type Gage Should I use
  5. How to Remove Semiconductor Strain Gages from Protective Case
  6. How to Install Semiconductor Strain Gage

Semiconductor Strain Gages - Standard Backed "BAR"  "U"  "M"

Standard Backed "BAR"  "U"  "M" Gage Data Sheet with Drawings

Loading...