MPT40 Flush Mount Transducer Standard Range psi | Pressure and Temperature

MPT40 Flush Mount Transducer | 150 psi | Pressure + Temperature

Micron's Model MPT40 is a flush mountable, miniature, low cost, general use pressure/temperature transducer. This transducer is made of corrosive resistant titanium (6AL4V). It utilizes high reliability bulk type semiconductor strain gages and temperature sensors bonded directly to the inside surface of the machined diaphragm. Titanium hermetic headers permit offering the MPT40 series with absolute or sealed reference options. The hermetic header is located just behind the strain gage diaphragm section of the sensor. Sealing the sensitive gages to an inert environment dramatically increases stability and reliability.
Long term stability and High Vibration versions are available.

PERFORMANCE OPTIONS (All Values Maximum)

 

Performance Specification Options

   

A

B

C

D

Units

Balance (Zero)

±3.00

±2.00

±2.00

±2.00

mV

Full Scale Sensitivity (MP40)

20.0±2.00

20.0±2.00

20.0±2.00

20.0±2.00

mV/V

Static Error Band

±0.50

±0.25

±0.25

±0.25

%FS*BFSL

Thermal Balance (Zero) Shift

±0.02

±0.02

±0.01

±0.05

%FS/°F

Thermal Sensitivity Shift

±0.02

±0.02

±0.01

±0.025

%FS/°F

 

*BFSL=Best Fit Straight Line

     

Standard Long Term Stability

± 2.00 %FS/Year Max.

     

Long Term Stability Options

L10 = <1.0

L5= <0.5

L2= <0.2

L1= <0.1

%FS/°F

MECHANICAL

Standard Pressure Ranges

300, 500, 1K, 2K, 3K, 5K, 7K psi

Non Standard Pressure Ranges

15, 20, 25, 30, 35, 40, ,50 100, 150, 200, 250, 10K psi

Other ranges possible

Consult Factory

Over Pressure (No change out of spec.)

2.0x Range

Usable Pressure (Small change in balance)

3.0x Range

Burst Pressure

6.0x Range

ENVIRONMENTAL

Storage and Operating Temperature

0° to 180°F

Compensated Temperature Range

30° to 130°F

Other Temperature Compensated Ranges

Consult Factory

Acceleration

(Consult factory for high vibration options)

100g's any axis

Media Compatibility

(wetted surface)

Liquids & Gases compatible with Titanium 6AL4V

ELECTRICAL

Input Constant Voltage Excited (MP40)

5.0 Volts DC or AC

Maximum Voltage

30 V for short periods

Input Resistance (Nominal)

1400 ± 400 Ohms(MP40)

Output Resistance (Nominal)

850 ± 200 Ohms (MP40)

Insulation Resistance Minimum

50 MOhms @ 50 VDC

MPT40 Drawing

MPT40 Pressure + Temperature Transducer Product Library

  MPT40 Data Sheet

  MPT40 Drawing

What are the Pressure Adaptors Used For?


Tip: Hover and Click on any of the icons below.

The options for the MPT40 are listed below along with descriptions and 1-4 unit pricing.
Quantity Discounts Available for 5+ units. Contact Sales.

PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
 
Performance Specification Options
A
B
C
D
Units
Balance (Zero)
±3.00
±2.00
±2.00
±2.00
mV
Full Scale Sensitivity (MP40)
20.0±2.00
20.0±2.00
20.0±2.00
20.0±2.00
mV/V
Static Error Band
±0.50
±0.25
±0.25
±0.25
%FS*BFSL
Thermal Balance (Zero) Shift
±0.02
±0.02
±0.01
±0.005
%FS/°F
Thermal Sensitivity Shift
±0.02
±0.02
±0.01
±0.005
%FS/°F
 
*BFSL=Best Fit Straight Line
 
Standard Long Term Stability ± 2.00 %FS/Year Max.
 
Long Term Stability Options
L10 = <1.0
L5= <0.5
L2= <0.2
L1= <0.1
%FS/°F
MECHANICAL
Standard Pressure Ranges 300, 500, 1K, 2K, 3K, 5K, 7K psi
Non Standard Pressure Ranges 15, 20, 25, 30, 35, 40, ,50 100, 150, 200, 250, 10K psi
Other ranges possible Consult Factory
Over Pressure (No change out of spec.) 2.0x Range
Usable Pressure (Small change in balance) 3.0x Range
Burst Pressure 6.0x Range
Titanium hermetic headers permit Absolute or Sealed Reference options. The header is located just behind the strain gage diaphragm of the sensor. Sealing the sensitive gages to an inert environment dramatically increases stability and reliability.
PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
 
Performance Specification Options
A
B
C
D
Units
Balance (Zero)
±3.00
±2.00
±2.00
±2.00
mV
Full Scale Sensitivity (MP40)
20.0±2.00
20.0±2.00
20.0±2.00
20.0±2.00
mV/V
Static Error Band
±0.50
±0.25
±0.25
±0.25
%FS*BFSL
Thermal Balance (Zero) Shift
±0.02
±0.02
±0.01
±0.005
%FS/°F
Thermal Sensitivity Shift
±0.02
±0.02
±0.01
±0.005
%FS/°F
 
*BFSL=Best Fit Straight Line
 
Standard Long Term Stability ± 2.00 %FS/Year Max.
 
Long Term Stability Options
L10 = <1.0
L5= <0.5
L2= <0.2
L1= <0.1
%FS/°F
Standard Length on our Transducers is Three Feet. Additional cable can be purchased in several pre-determined lengths.
Micron's Pressure Adaptors are designed for use with our Flush Mount Pressure Transducers. Machined from 17-4PH Stainless Steel for use in demanding applications they are available in Several Thread Options and Sizes.
 
Pipe Threads (NPT)
1/16 in.
1/8 in.
1/4 in. 
  BSP Threads
1/4 BSP Type B
3/8 BSP Type B
  Straight Threads
3/8 in.   x 24
7/16 in. x 20
1/2 in.   x 20
Flush Mount | Standard Flush Mount Transducer
Use our Straight 3/8 x 24 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Straight 7/16 x 20 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Straight 1/2 x 20 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Pipe 1/16 x 27 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Pipe 1/8 x 27 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Pipe 1/4 x 18 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our BSP 1/4 Parallel Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our BSP 3/8 Parallel Threaded Adaptor to convert your Flush Mount to a Threaded Mount
  • Performance Spec. A
  • 150 psi
  • Gage
  • Standard Stability
  • Standard Cable Length 3 feet.
  • Flush Mount
$230.00
$230.00
Loading...