MP49 Flush Mount Low Cost Transducer

MP49 Flush Mount Transducer | 300, 500, 1k, 3k | psi

Micron's Model MP49 is a flush mountable, miniature, inexpensive, pressure transducer. The sensing head is machined out of 17-4PH corrosive resistant steel. High reliability bulk type semiconductor strain gages are bonded directly to the inside surface of the sensor diaphragm. The brass body contains the sensor bridge completion elements, to which a 6 foot four-conductor cable is attached.

MECHANICAL

Standard Pressure Ranges

300, 500, 1k, 3k, PSI

Over Pressure (No Change Out of Spec)

2.0x Range

Usable Pressure (Small Change in Balance)

3.0x Range

Burst Pressure

6.0x Range

PERFORMANCE (PRESSURE)

Balance (Zero) Output

± 3.00 mV

Full Scale Sensitivity

20.00 ± 2.00 mV/V

Static Error Band

± 0.50% FS

Thermal Balance (Zero) Shift

± 0.02 %FS/°F

Thermal Sensitivity Shift

± 0.02%FS/°F

Long Term Stability

± 2.00 %FS/Year

ENVIRONMENTAL

Storage and Operating Temperature

0° -180°F

Compensated Temperature Range

30° - 130°F

Media Compatibility (wetted surface)

17-4PH Steel compatible Liquids & Gases

ELECTRICAL

Input Constant Voltage Excited

5.0 Volts DC or AC

Maximum Voltage

30 V for short periods

Input Resistance (Nominal)

1700 ± 800.

Output Resistance (Nominal)

850 ± 200.

Insulation Resistance Minimum

50 M. @ 50 VDC (Minimum)

MP49 Drawing

MP49 Pressure Transducer Product Library

  MP49 Data Sheet

  MP49 Drawing

What are the Pressure Adaptors Used For?

Tip: Hover and Click on any of the icons below.
This product qualifies for quantity discount pricing.(what's this?)
MECHANICAL
Standard Pressure Ranges300, 500, 1K, 3K psi
Over Pressure (No Change Out of Spec)2.0x Range
Usable Pressure (Small Change in Balance)3.0x Range
Burst Pressure6.0x Range
PERFORMANCE (PRESSURE)
Balance (Zero) Output ±3.00 mV
Full Scale Sensitivity20.00 ± 2.00 mV/V
Static Error Band ±0.50  FS *BFSL
Thermal Balance (Zero) Shift)± 0.02 %FS/ °F
Thermal Sensitivity Shift± 0.02%FS/°F
Long Term Stability± 2.00 %FS/Year Max.
Standard Length on our MP49 Transducer is Six Feet. Additional cable can be purchased in several pre-determined lengths.
Micron's Pressure Adaptors are designed for use with our Flush Mount Pressure Transducers. Machined from 17-4PH Stainless Steel for use in demanding applications they are available in Several Thread Options and Sizes.
 
Pipe Threads (NPT)
1/16 in.
1/8 in.
1/4 in. 
  BSP Threads
1/4 BSP Type B
3/8 BSP Type B
  Straight Threads
3/8 in.   x 24
7/16 in. x 20
1/2 in.   x 20
Flush Mount- Standard Flush Mount Transducer
Use our Straight 3/8 x 24 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Straight 7/16 x 20 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Straight 1/2 x 20 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Pipe 1/16 x 27 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Pipe 1/8 x 27 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our Pipe 1/4 x 18 Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our BSP 1/4 Parallel Threaded Adaptor to convert your Flush Mount to a Threaded Mount
Use our BSP 3/8 Parallel Threaded Adaptor to convert your Flush Mount to a Threaded Mount
  • 300 psi
  • Gage
  • Standard 6 ft. Cable Length
  • Flush Mount
$99.00
$99.00
Loading...